Model: PWU
Load capacity :3t -16t
TOPTECH type U wire rope hoist, also named as standard headroom hoist Its cross-travel trolley designed for direct drive without exposed reduction gearing. With the load distributed over Four or eight wheels, ordinary rolled section beams can be used for monorail track applications. Even for short spans, high-load cranes can be operated on ordinary rolled section beams using this hoist.
1. Modular design, compact structure, and light weight.
2. The hoist operates with low noise, reducing disturbances to the working environment and workers.
3. IP55 protection rating for excellent dust and water resistance, Enhanced adaptability and reliability in various environments.
4. Full frequency drive for hoist lifting and cross-traveling ensures smooth and precise speed control, enhancing operational efficiency and stability through continuous, extended operation capabilities.
1.Trolley motor
Inverter duty motor with IP55 protection;Spline fit direct drive sealed travel system;Long life adjustment free compact brake.
2.Trolley Frame
Light self-weight;small wheelpressure;Compact structure lagers the working range and optimized the lifting height.
3.Overload limite switch
Electro-mechanical overload protection integrated in the rope retaining crosshead Evaluation by means of the central electronic unit.
4.Wire Rope
Galvanized wire rope with tensile strength up to 2160Mpa;Nylon Rope guide operation smooth rope leadin;
even in critical environment.
5.Electric Panel
Modular Design,Enclosure protection class IP55;adopt with Schneider electric contactor,quick adapter.
6.Hoisting motor
It includes 3-stage helical gearbox with high endurance gears and oil lubrication for the entire service life;Thermalcontact,DC disk brake.
7.Height limit switch
4 contacts set for emergency cut-off in the upper and lower positions as standard;
Additional safety thanks to fast to-slow cut-off.
8.Hook Block
DIN 15401 standard RSN hook with strength class T;The notched latch for firm contact improves resistance against lateral force.
| Load kg | Duty class FEM | Rope reeving | Lifting motor KW | Lifting speed (m/min) | Trolley motor KW | B (mm) | H (mm) | C (mm) |
| 3000 | 2m | 2/1 | 3.2 | 0~5 | 0.4 | 110-150 | 135 | 1050 |
| 3000 | 2m | 2/1 | 4.5 | 0~8 | 0.4 | 110-150 | 135 | 1050 |
| 5000 | 2m | 2/1 | 4.9 | 0~5 | 0.4 | 110-150 | 135 | 1350 |
| 5000 | 2m | 2/1 | 7.5 | 0~8 | 0.4 | 110-150 | 135 | 1350 |
| 5000 | 2m | 4/2 | 4.9 | 0~5 | 0.4 | 110-150 | 135 | 1350 |
| 5000 | 2m | 4/2 | 7.5 | 0~8 | 0.4 | 110-150 | 135 | 1350 |
| 10000 | 2m | 4/2 | 9.5 | 0~5 | 0.4*2 | 130-180 | 155 | 1500 |
| 10000 | 2m | 4/2 | 12.5 | 0~7 | 0.4*2 | 130-180 | 155 | 1600 |
| 16000 | 2m | 4/1 | 12.5 | 0~3.5 | 08*2 | 130-180 | 155 | 1700 |
Note:
1. Trolley speed: 0~20m/min VFD
2. Subject to change without prior notice. The final technical data can be found in our manuals and dimensional drawings
Double girder overhead bridge crane
FEM Standards Single Girder Overhead Crane
Wire Rope Hoist for overhead crane
A: The load capacity ranges from 3200 kg to 20,000 kg.
A: The lifting height depends on the specific model and design, with a maximum typically specified in the product specifications.
A: Features may include two-speed and single-speed motors, controlled by contactors or inverters, ensuring ease of operation and reliability.
A: Maintenance and inspection intervals depend on usage conditions, with detailed plans and procedures in the hoist manual.
A: Safety features include overload protection, limit switches, emergency brake systems, and more.
A: Installation and removal should be carried out by experienced service personnel.
A: The working environment temperature is typically between -20°C to +40°C, with special models or measures required under extreme conditions.
A: Consider factors such as load capacity, lifting height, working environment, frequency of operation, and budget; we offer selection guides or assistance in choosing the right model..
EN
AR
NL
FR
IT
JA
PT
RU
ES
ID
TR
MS
